axial surface
英 [ˈæksiəl ˈsɜːfɪs]
美 [ˈæksiəl ˈsɜːrfɪs]
网络 轴面
双语例句
- The imaginary surface bisecting the limbs of the fold is called the axial surface.
将褶皱翼部平分的理想面称为轴面。 - Elastic-Plastic Fracture Analysis for Internal Axial Surface Half Elliptical Cracks in Oil& Gas Pipeline
油气管道内部轴向表面半椭圆裂纹弹塑性断裂分析 - Many inessential factors are becoming more important, such as the viscous dissipation, axial conduction and surface wettability.
许多在常规尺度下不重要的因素如黏性耗散、轴向热传导和表面浸润性等都开始变的突出。 - The structural model should be built in4 steps with the axial surface analysis as the basis, the fault-fold geometric analysis as the key, the balanced idea as the guidance and the stru.
主要遵循4个基本步骤，轴面分析是基础，断层褶皱形态分析是核心，平衡观念是灵魂，构造复原是手段。 - Fracture and reliability assessment on submarine pipelines with axial surface cracks
带轴向表面裂纹海洋管道的断裂计算与可靠性评估 - Fiber is a fine sample, which has a diameter about 10-30 urn. The localized analyses in fiber radial and axial direction on surface layer are more microanalysis.
由于纤维属于微小样品，其直径一般在10&30μm，对于单纤维径向或轴向不同部位及其表面特征的研究更属于微区的分析； - Method The CT images of 82 patients ( 90 orbits) of eye injury were retrospectively analysed, all in scanning of axial surface, there are 6 patients of images were multi planar reconstruction ( MPR) on the end of scanning in MSCT.
方法回顾性分析82例（90眼）眼外伤的CT图像，均轴位扫描，其中6例螺旋CT扫描后行多平面重建。 - Element matrix's precise close solution of no thickness axial symmetry sliding surface between pile and soil contact
桩-土间无厚度轴对称滑动面单刚矩阵的一种闭合解 - The obtained conclusions is significative for computing axial blocking dips, surface peak intensity as well as sputtering by using Monte Carlo simulation.
本文得出的结论对用蒙特卡罗方法模拟计算轴阻塞分布、表面峰强度及溅射等有应用价值。 - The coherent coefficients between axial vibration and surface vibration are not high except some frequencies and bending vibration is the main exciting source of surface vibration.
纵振和弯曲振动对裙部表面振动进行同频激励，但二者激励强度不同，纵振只在部分频率段具有激励作用，而弯振是表面振动的主要激励源。 - Direct Position Analysis of Spherical Parallel Mechanisms Based on Spherics The More Exact Law and Aberration of Reflection Image on Axial Spherical Surface
基于球面三角学的球面并联机构位姿正解近轴球面反射成像的二级近似与象差 - More cracks took place when the powder thickness increased by 1 mm to 2 mm on the axial surface in the axial direction;
在轴面沿轴向以1mm的梯度涂塑瓷粉至2mm将产生较多瓷裂，厚度突然中断则瓷裂严重； - This paper described in detail the surface replica technique to observe wood with transmission electron microscopy to get the axial surface structure's characteristics of wood.
本文详细叙述用透射电镜观察木材构造时木材的表面复型技术，此系观察研究木材轴向表面的结构特征，分为一级复型及醋酸纤维素的二级复型。 - Results: Inlay axial surface was smooth, the contour was consistent with the residual tooth body and the 3-D configuration in adjacent area was accurate.
结果：所设计的嵌体轴面表面光顺，外形突度与剩余牙体组织一致，邻接触区三维形态准确。 - The Requirements Proposed by the Kinetic Rotating Oil Seal for Axial Surface State Condition
油封旋转动密封对轴表面状态提出的要求 - Initial Reliability of the Fracture Resistant Critical Strength of an Internal Pressure Cylinder With Axial Surface Cracks
含轴向表面裂纹内压圆筒抗断裂临界强度的初始可靠度 - The more exact object image law of reflection image on axial spherical surface is presented, the lateral magnification and aberration are discussed.
本文给出了二级近似时近轴球面反射成像的物象规律，进而讨论了横向放大率与像差。 - Experimental Study on Fracture of Axial Tension of RCC Layer Surface
有层面碾压混凝土轴拉断裂研究 - The design method considers not only continual but also calculus equation, as well as motive equation of flow, so the calculated axial surface flow is more closer to actual flow and design accuracy is increased.
该设计方法不仅考虑了连续方程和叶片微分方程，还考虑了水流的运动方程，使计算出的轴面流场更符合实际情况，从而可提高水轮机转轮设计的命中率。 - The degree of partial coherence between axial vibration of crankshaft and surface vibration of crankcase is not very high except at some frequencies;
纵振与表面振动的总体相干水平不高，只在部分频率段具有较高的相干函数； - By axial surface, coronal section, sagittal place and 3D bone reconstruction analysis, CT picture can accurately display the fracture line, the separation and displacement of fracture and the damage state of peripheral soft tissue also can be acquired.
通过轴位、冠状位、矢状位以及3D骨重建分析，能清晰、准确地显示骨折线，并对骨折的分离、移位及周围软组织的损伤情况均可准确地了解。 - Objective: To realize the requirement of adjacent area accuracy, axial surface physical contour and smoothness in the process of inlay computer-aided design ( CAD).
目的：解决光顺品质与精度在曲面构建中相冲突的问题，实现在嵌体计算机辅助设计中兼顾生理性外形、光顺品质及邻接区精度的三维轴面构建。 - The results of experiments showed that axial cracks on the surface of the spares are quenching cracks causing by defects of materials, and cracks in the center are stress cracks causing by spark cutting machining.
结果表明，齿轮轴纵向裂纹为由原材料缺陷引起的淬火裂纹，心部内裂纹为在解剖分析线切割加工过程中产生的应力裂纹。 - Rational selection of cutting angle of turning tool for ring slot with axial curve at end surface
端面轴向曲线环槽车刀切削角度的合理选择 - Methods CT findings on axial, MPR and surface shaded display ( SSD) images in 28 patients with 30 calcaneal fractures were analyzed, and the fractures were classified and appropriately treated.
方法分析28例30个跟骨骨折的轴位CT、MPR及表面重建（SSD）CT的表现，对骨折进行分型，并选择合适的治疗方案。 - Initiation Analysis of an Axial Surface Crack in a Hollow Cylinder Subjected to Thermal Shock
圆筒形容器轴向表面裂纹热冲击问题的开裂分析 - Mainly concentrated in the axial stress on the surface, cover and the base occupies a bit ( switch).
应力主要集中在轴的表面，盖与底座接合部位（开关处）。 - The rigidity of the prostheses doesnt increase as the rigidity of materials increases if the thickness of the axial surface is enough.
而在保证修复体一定的轴面厚度时，增强材料的刚性并不能使修复体的刚性随之增强。 - At last, the effect of cutting parameters on the roughness of the axial hole is studied. Studies have shown that the feed plays a key role in the level of the surface roughness, the axial surface roughness value increases with feed rate.
最后还讨论了切削参数对孔的轴向粗糙度的影响，其中进给量对表面粗糙度的高低起着关键作用，进给量增大时，表面粗糙度也增大，反之亦然。 - Drilling speed has a little effect on surface roughness Ra, the axial surface roughness value increases with high cutting speed, because of that, when the speed is too high, the vibration cutting increased.
钻削速度对表面粗糙度Ra影响不大，但是当速度过高时，由于切削振动等原因，表面粗糙度会有所上升。